Enhance the charm of your home or building with bonnet roofing materials as these provide an extravagant face to any building. Although, these are quite unusual, these offer a huge list of advantages to the homeowners. These are not only stylish but, cheap and easy to install.

Tin is a long-lasting roofing material, and tin roofs, if properly installed and cared for can last up to 50 years. To keep a tin roof in great shape, it needs to be painted regularly. Tin roofs are a perfect combination of the both durability and stability. Even the worst weather can be withstood by the tin roofs. The following part of the article familiarizes an individual with the building techniques of tin roofs.

Installing the tin roofs would require certain very important items like 30-lb. roofing felt, 1-inch galvanized clout nails, 3-inch metal edging, 1 1/4-inch roofing nails, 12-foot sheets of tin roofing, 1/4-inch metal wood screws and tin snips. Ensure, you have them all beforehand.

To start with, first of all, lay down 30-lb roofing felt over the entire roof surface before putting tin sheet. Well, this is done to provide a base to the tin. Having placed the felt, secure them with the rafters all over with the help of 1 inch clout nails. Make sure, the nails are galvanized.

The periphery of the roof is then to be covered with the 3 inch metal. Nail them with the rafter nails using nails of size 1 inch. Pull up 12-foot sheets of tin roofing material onto the roof. Attach the sheets with 1/4-inch metal screws to the roofing rafters. Put screws into the first sheet every 2 feet down the center and inside edge.

Cover the entire roof with the tin roofing material. Make sure that the roofing material overlaps with one another, so as to prevent any gaps or holes, which can cause leaks in the future, or even contribute to early corrosion. Use nails to infix the sheets of roofing and stabilize them in their corresponding positions.

Having installed all the tin sheets over the roof, cut the extra portion of the sheet using tin snips. Later on, secure the sheet with the nails. Moreover, before cutting down the extra part, bend the sheet down to cover the ridge of the roof as well. Also secure it with metal wood screws of size inch.

For constructing the tin roofs, all you need is well qualified and experienced roofers. Since, tin roofs are bit difficult, an ill- skilled man may cause heavy damages to the roof and the house in turn.